Masticated EPDM Sheet Rubber
Our masticated EPDM sheet rubber is a cost-effective, high-strength material designed for demanding industrial, transportation, and infrastructure applications.
Manufactured from recycled EPDM rubber blended with fiber reinforcement, it delivers excellent durability, compressive strength, and long-term outdoor performance.
It retains EPDM’s excellent weather resistance while offering improved wear resistance and load-bearing capability at a more economical price point than virgin rubber alternatives. Available in sheets and rolls for easy fabrication and installation.
Contact Us For Availability
Key Features
- Manufactured from recycled EPDM rubber with fiber reinforcement
- Excellent tensile strength, tear resistance, and abrasion resistance
- High compressive load capacity for structural and industrial use
- Outstanding resistance to ozone, UV, weathering, and water
- Performs well across a wide temperature range
- Economical alternative to virgin EPDM rubber
- Smooth to slightly textured finish depending on thickness
Why Use Masticated EPDM Sheet Rubber
- Ideal for harsh outdoor and industrial environments
- Handles heavy loads while maintaining dimensional stability
- Resists cracking, rot, and environmental degradation
- Provides long service life with reduced material cost
- Excellent choice for wear surfaces and load-bearing pads
- Sustainable option utilizing recycled rubber materials
Material Availability
- Durometer: 80 ± 5 Shore A
- Thicknesses: 1/16 – 1/4 “
- Widths: 24 – 48 inches
- Lengths: Up to 100 feet
- Color: Black
Material Safety Data Sheets (MSDS) and material test reports are available upon request
Request A Quote
"*" indicates required fields
Applications
- Mud flaps and splash shields
- Stone guards and radiator baffles
- Machine skirting and wear strips
- Chute linings, deflectors, and guards
- Load-bearing pads for equipment
- Bridge/building pads and railway tie pads
- Heavy-duty industrial matting
- Impact protection and general-purpose padding
Comparison Chart
| Category | EPS-MSS-B80 | NRT/Symar |
| Thickness Range | 1/16 – 1/4 in | 0.080 in (2 mm) – 1.0 in (25.4 mm) |
| Length | Up to 100 ft | Up to 800 ft (gauge dependent) |
| Width | 36 in | 48″, 61″, 100″ |
| Color | Black | Black |
| Hardness (Shore A) | 80 ± 5 (ASTM D2240) | 78 ±5 |
| Tensile Strength | 878–904 psi (ASTM D412) | 5.3 MPa (768 PSI) |
| Elongation | 406–421% (ASTM D412) | 18% |
| Density / Specific Gravity | 1.05 g/cm³ (ASTM D297) | 1.18 g/cm³ (ASTM D297) |
| Tear Strength | 263 ppi (ASTM D624 Die B) | 35 kN/m (200 PI) |
| Compression Set (70°C, 22h) | 60% (ASTM D395B) | Not specified |
| Change in Hardness (70°C, 70h) | +1 (ASTM D573/2240) | ±10 (ASTM D2240) |
| Change in Tensile | -0.9% / +0.01% (ASTM D573/412) | ±25 (ASTM D412) |
| Change in Elongation | +4.3% / +0.9% (ASTM D573/412) | ±25 (ASTM D412) |
| Change in Tear | -1.5% / -6.8% (ASTM D573/624) | Not specified |
| Ozone Resistance | No cracks (ASTM D1171B) | ASTM D518 Method B* |
| Low Temp Brittleness (-40°C) | No cracks (ASTM D2137) | Pass @ -40°C |
| Taber Abrasion | 0.0406 mg/rev (ASTM D3389) | Not specified |
| Flammability | Pass (FMVSS 302) | Not specified |
*Method Withdrawn, Replaced
Grades Available
| Name | Style | Duro | Tensile (PSI) | Elongation (%) | Color | Specifications |
| Masticated EPDM | EPS-MSS-B80 | 80 ± 5 Shore A | 878 (Across Grain), 904 (With Grain) | 406 (Across Grain), 421 (With Grain) | Black | Download |
Focused on Partnerships
We support our customers, and prospects throughout the purchase journey. Our team is made up of experienced professionals and highly trained engineers who will help with material selection, sampling, testing, and any application support you might need to accomplish your goals.